Neo PSU MK2

The new Neo MK2 is housed in a redesigned case to bring it in line with other products in the range creating an improved family feel. The Neo MK2 PSU is an advanced turntable power supply providing user controllable fine speed adjustment, an advanced anti-vibration motor circuit and the convenience of electronic speed change. The Neo MK2 will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy.

The Neo MK2 PSU is compatible with the following Rega turntable models:

P3-24 / RP3 / Planar 3 2016-current / RP6 / P5 / P7 / RP40 special edition / RP8 Or any older Rega turntable fitted with our aftermarket 24v upgrade kit.

Using the same DSP (digital signal processing) generator found in the Planar 10 power supply the Neo MK2 is built upon a high stability crystal.

The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed whilst producing a near perfect sinusoidal waveform to drive the 24v motor. Fine speed adjustment is made via the rear panel using the supplied custom Neo trim tool (supplied).

Planar 6 and Planar 8 turntable models which include the Neo will now ship with the MK2 Neo supplied as standard.

Technical Specifications

Output to motor bi-phase: 24 V AC protected by resettable fuse
Power consumption: 7.2 W
Voltage: 24 V AC
Power supply: Rega PS1 only
Speed control step size: 0.01 RPM
PS1 (UK): Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (EU - Euro 2 pin): Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (American): Input 115-120 V ~ 60 Hz / Output 24 V ~ 350 mA AC
PS1 (Australian): Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (Japan): Input 100 V ~ 50/60 Hz / Output 24 V ~ 350 mA AC
PS1 (Korea): Input 220 V ~ 60 Hz 0.07 A / Output 24 V ~ 350 mA AC

Product Downloads

NEW PSU MK2 USER MANUAL 3.4MB pdf

The Ear review, February 2018

Complementary Components

24v Motor Upgrade Kit

Individually hand tuned PCB to minimise vibration
Rega designed 24v low vibration, low noise synchronous AC motor assembly
Rigidly mounted to improve start up speed over previous suspended Planar models
Guaranteed to improve drive, speed stability and sonic performance

Planar 3

RB330 tonearm
Elys 2 (optional)
12 mm opti-white polished glass platter
Double brace technology
24 V low noise motor
Compatible with Neo power supply
Clear dust cover
Advanced EBLT drive belt

Experience Rega

Contact your nearest Rega dealer or global distributor

UK Dealers Global Distributors

Lifetime Limited Warranty

All Rega products carry a Lifetime Limited Warranty.

Every product we make is designed and assembled in the UK to the highest possible standard. This warranty covers confirmed manufacturing defects. This warranty does not cover wear and tear, or parts that are considered consumable. Any unauthorised modifications or failure to follow the Rega recommended guidelines in the product manual may invalidate the warranty. Due to local laws, warranties may vary by country in which units are sold. Please contact your Rega retailer or distributor for warranty details. Your statutory rights are not affected.

Warranty Conditions