Nd3 new
The all new Nd3 moving magnet cartridge was developed over 10 years and promises to deliver ‘next level’ performance from moving magnet technology. The Nd range (patent pending) we believe is a world first to use ultra-high powered Neodymium magnets which allow us to create this totally unique design.
Advanced Technology
Each Nd3 is meticulously hand-made by our highly skilled technicians. The stylus profile is a high quality elliptical profile manmade polycrystalline diamond, which is bonded to a round titanium shank. The design uses brand new generator geometry with perfect symmetry to achieve accurate channel balance. The Nd3 also has an optimised pole gap for superior linearity and cross talk characteristics, this provides a far wider soundstage than the previous models. This new cartridge is created with miniaturised parallel coils which are wound in house utilising 38-micron wire with just 1275 turns. This produces a low inductance, low impedance generator giving vastly improved high frequency response. In keeping with our commitment to sustainability, the Nd range is supplied in 100% recyclable packaging.
Key Features
- Bonded elliptical profile stylus
- Aluminium cantilever
- Neodymium magnet
- Unique generator
- Rega 3 point mounting system
- Highly rigid lightweight PPS body
- Handmade stereo cartridge
- 100% recyclable packaging
- Lifetime warranty against manufacture defects
Nd Magnet technology
Often used in Moving Coil designs (including our own) we believe the Nd3 is the first moving magnet to utilise a Neodymium (Nd) N55 magnet. This is the world’s most powerful commercially available magnet and is a crucial component that makes this unique design possible by delivering extra power than standard bar magnet designs.
Glass filled PPS body
The complete assembly is housed in our zero tolerance Injection moulded glass filled polyphenylene sulphide body (PPS) which is a lightweight and highly rigid material. A low mass body reduces stress on the tonearm bearings and aids free movement which is critical in accurate vinyl replay. This new body design was inspired by our hugely successful MC range.
Cantilever & stylus profile
The Nd3 aluminium cantilever is fitted with a bonded precision elliptical stylus. This profile provides exceptional tracking accuracy and extracts great levels of detail from the vinyl surface.
Factory Fitted options
The Nd3 cartridge will be offered as a factory fitted option on the Planar 2 and Planar 3 turntables offering exceptional performance and value for these models. The factory fitted package is offered at a discounted rate compared to when purchased separately, ask your Rega dealer for details.
Rega rebuild scheme
The unique pivot pad design of Rega cartridges improves performance by eliminating the mechanical joint between the stylus housing and the main body. This vastly improves tracking ability and stability of the stylus. If you should damage or wear out your Rega cartridge, simply return it to you Rega dealer and they will supply you with a rebuild cartridge fitted with a new cantilever, stylus and pivot pad. Each rebuild is fully tested as a new cartridge would be. The rebuild is sold at a reduced price once you trade in your worn or damaged cartridge that is equivalent to a replacement stylus offered by other manufacturers.
Technical Specifications
- Nominal Output Voltage
5-6mV
- Stylus
Bonded Elliptical
- Fixing
3 point fixing
- Coils
Miniaturised parallel coils
- Window Colour
Red
- Tracking pressure
1.75g
For full technical specifications, download Nd cartridge mounting instructions below.
Downloads
- Nd cartridge mounting instructions 125KB pdf
Environmental Labelling of Packaging
- Nd cartridge packaging data 27KB pdf
It is a very sophisticated cartridge for the price, one that is capable of delivering the fine detail of vocal effects, and give those vocals a degree of expression rarely heard in relatively affordable cartridges. Depth of image is particularly good too as is bass, both are a reflection of the increased resolution in the highs that the Nd3 delivers.
Complementary Components
- RB220 tonearm
- Rega Carbon cartridge fitted
- New Walnut effect finish for 2022
- 10 mm glass platter
- 24 V low noise motor
- Three high gloss acrylic skin finishes
- Clear dust cover
- Advanced EBLT drive belt
- RB330 tonearm
- Elys 2 (optional)
- 12 mm opti-white polished glass platter
- Double brace technology
- 24 V low noise motor
- Compatible with Neo power supply
- Clear dust cover
- Advanced EBLT drive belt
- Dedicated Moving magnet phono stage
- Compatible with all MM cartridges
- USB output
- A2D functionality
- User friendly front and back panels
- Custom design case
- Dedicated Moving Magnet phono stage
- Compatible with all MM cartridges
- Simple connectivity and operation
- Custom design case
- Multi Award winning phono stage
- 30 W per channel into 8 Ω
- 2 Line inputs
- Integrated MM phono stage
- Headphone socket
- Mini remote control
- All new custom designed chasis
- 72 W per channel into 8Ω
- 4 line inputs
- Integrated MM phono stage
- 2 Digital inputs
- Headphone socket
- Mini remote control
- Pre-amp out / Record out
Experience Rega
Contact your nearest Rega dealer or global distributor
Lifetime Limited Warranty
All Rega products carry a Lifetime Limited Warranty.
Every product we make is designed and assembled in the UK to the highest possible standard. This warranty covers confirmed manufacturing defects. This warranty does not cover wear and tear, or parts that are considered consumable. Any unauthorised modifications or failure to follow the Rega recommended guidelines in the product manual may invalidate the warranty. Due to local laws, warranties may vary by country in which units are sold. Please contact your Rega retailer or distributor for warranty details. Your statutory rights are not affected.